You are here

4mul8 Machinery 50 Liter Pasteurizer For Milk 50l Direct Duty Free

4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free


4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free
4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free

4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free

4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free

4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free
  
4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free


50 Liter Pasteurizer - ML-50. Place on a leveled surface. Liters of water in the sterilizer. After each use, user must add. The right amount of water, this avoids drying up and burning out the electric heat pipe. Prepare the goods to be pasteurized and add to the pasteurizer, there should be a gap between the bag and the box, to guarantee no. Cover the lid, and tighten the screws.

Inspect the power source type, determined with the specification. Then place end inserts on the sterilizer on the plug, and another end insert on the power source plug. When the power line plug indicating lamp is brightly lit up, it means pasteurization has started. When you plug in, turn the timer to the exact time that you want to set (Set time by using clockwise order, the max is 60 minutes), Then set the sterilization temperature.

The max sterilization temperature we suggest is 126C. After setting the time and the temperature, turn on the switch. When the light turns on, it starts to work. When the temperature reaches the setting time, it will stay on a heat preservation mode, meanwhile it will enter the timing step of sterilization. When the time set is over with a beep sound, it means the sterilization step is over.

After it is antiseptically finished, first it captures the plug, stops heating up, and does not permit the opening of the bleeder valve to prevent releasing steam immediately. Only then discharge under gas to uncap.

Frequently inspect the sterilizer power line and whether the wires are. The sterilizer should set to ventilate in a cool dry place. The safety valve and the bleeder valve leaves the plant when checked against the authoritative guidelines. This includes the valve plumbum seals and so the screw does not easily come loose. Strictly prohibits over-pressure use, guarantees security.

The total volume should be 4/5 full for optimal safety. The user can still pasteurize 50 Liters of milk, juice, pulp, jam, peanut butter, various soybean and chilli pastes, whatever you like. This model is great for those home-cooks looking for a way to get their signature sauces and food items out there. The seal packing collar is built for no oil leakage, in order to avoid damages and air leaks.

Strictly prohibits causing detonation or suddenly. Boosting the pressured-chemical substance with the steam medium that. When pasteurizing, this model is fitted with technology that does not let the safety valve get clogged, as the bleeder valve vent must be clear to guarantee the free flow of air, otherwise the safety valve and the bleeder valve will cause the vent to stop.

Without this feature, it is easy to have an accident. When pasteurizing surgical dressings or jars, the liquid should be filled in heat-resistant glass jars, and should not surpass 3/4 the volume. The bottle mouth features a cotton plug, not a rubber one which uses drills and creates large gaping holes.

The different types of pasteurizing materials, like the surgical dressing and the liquid and so on, are not to be mixed. After the pressure gauge has been used for a long time, if its reliable pressure instruction is not correct or it cannot reach the zero position, it should be promptly replaced. This should not happen normally, as these units are checked and inspected before leaving the factory. Usually it should regularly deliver because it has the intelligence in the unit to carry on verification. If by any chance the reading is not normal, try a new table or placing the pasteurizer on the floor before replacing the gauge.

The safety valve should periodically be inspected when the gauge hand. If the safety valve does not start, stop using and replace with the right safety valve immediately. After pasteurization has ended, first pull out the plug, this stops heating, and does not let the bleeder valve release steam immediately. Afterwards, wait for the gauge hand to return to the zero position.

Only then discharge the gas to uncap. Does not power on, the indicating lamp is not bright. (1)Inspect with a multimeter.

Electrification of the outer covering. The power source has not connected. Steam in the pressure gauge. Air leak from the attachment. All factory defects are taken care of by us! Check out my other items! The item "4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free" is in sale since Monday, November 11, 2019. This item is in the category "Business & Industrial\Agriculture & Forestry\Livestock Supplies\Dairy Cattle".

The seller is "qualitycounts403" and is located in Calgary, Alberta. This item can be shipped worldwide.
  • Model: ML-50
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Power Source: Electric
  • Type: Pasteurizer
  • Brand: 4mul8 Machinery



4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free
  
4mul8 Machinery 50 Liter Pasteurizer for Milk 50L Direct Duty Free